F4 29461

Description

High-Purity Fluorine Plastic Sub-Boiling Distillation Device:

Technical indicators: experiments show that most of metallic impurities is about 10PPB acid purification, after a distillation, the metal impurities can be reduced to 1PPB around, even lower. If the acid requirements are higher, increase the number of purification. Purification of the normal amount of acid up to 30ml / hours or more.

Product Description:

High-purity fluorine plastic sub-boiling distillation device:

In order to meet the ICP, ICP-MS needs a very low detection limit of laboratory-scale ultra-pure acid distillation unit, the device uses voltage regulator heat, so keep sub-boiling acid, and then the acid vapor cooling Preparation of ultra-pure acid, the principle of .

The device used in containers are used F4 (polytetrafluoroethylene) and F46 (poly-FEP) corrosion-resistant high-purity fluorine plastic, so you can deal with nitric acid, hydrochloric acid, hydrofluoric acid and other acids instead of the common laboratory alteration , and this feature is not quartz sub-boiling distiller possess.

Experiments show that most of metallic impurities is about 10PPB acid purification, after a distillation, the metal impurities can be reduced to about 1PPB, even lower. If the acid requirements are higher, increase the number of purification. Purification of the normal amount of acid up to 30ml / hours or more.

Accessories are: FEP narrow-mouth bottle, regulator, F4 joints, heating sets, plastic pools, and out of water.